Electron Beam Multisource Series

• Compact & industrial design
• Low stored energy*: 1J/kW
• High efficiency
• Easy Start-up, "Ready to use" system
• Adjustable recovery after an arc*: stop time and raising time
• Accurate metrology adjustment* :
  
• output voltage calibration,
  
• output current calibration
  
• parallel & serial compensation
• Flashless mode available
• Total protection against arcs, overloads & short circuits
• Low Electromagnetic Interference (EMI)
• Low ripple + noise
• Outputs on CLAYMOUNT CA4 connector
• Resistance in series for output voltage
• Double resonance converter using IGBT
• 2 years warranty

* for HV main source

With more than 15 years of experience in design and the manufacturingof electron beam welding power supplies, TECHNIX offers a complete range of electrical sources dedicated to this application.

Based on double-resonance technology, these power supplies offer many advantages in terms of performance, flexibility, reliability and price.

Multisource Unit models are offered for customers who are looking for a complete system of power supplies with a plug and play configuration, all integrated in one cabinet.
All the models include an oil tank.

Multisource Unit power supplies include the following electrical sources :

• main HV power supply
• filament power supply
• wehnelt / bias power supply
• bombardment power supply

Mains voltage for main HV source
3 x 400V ± 10% 50-60Hz + Earth
Other values can be considered
Polarity for main HV source:
Negative (Earth reference)
Voltage regulation for main HV source
Load variation: better than ± 0.1 % of full voltage (for 10 to 100 % load)
Line regulation: better than ± 0.05 % of full load (for a ± 10% variation of mains voltage)
Current regulation for main HV source
Load variation: better than ± 0.5 % of full voltage (for 10 to 100 % load)
Line regulation: better than ± 0.05 % of full load (for a ± 10% variation of mains voltage)

Ripple + Noise for main HV source: less than 0.1% RMS of full voltage

Stored energy: 1 J/ kW

Stability (after one hour warm-up) for main HV source
0.1 % / hour, 0.03% / 8 hours of operating with constant load and ambient temperature

Temperature coefficient: 200 ppm/°C

Operating temperature: from 0 to 40°C

Stocking temperature: -20 to + 40°C

CE Certification