RS232 Digital interface

With this Option, Technix Power Supplies can be remotely controlled with a computer terminal through an RS-232 interface. This interface is available on the rear panel of the power supply, on a DE-09 connector.

Request a quote

Main specification Detailed specification Interfaces Products

MAIN SPECIFICATION

RS232 Board features:

Specially designed for High Voltage environment
Labview runtime available (option)
Optical fiber (option)
Full duplex mode
Bauds rate: 9600
ASCII protocol
12 Bits resolution
Communication frequency: 10Hz

Detailed specification

Instructions available on the RS232 interface:

Output Voltage setting
Output current setting
Output voltage measurement
Output current measurement
HV-On control
HV-Off control
Remote control
Inhibit control
Mains Monitor
Regulation mode status
End of Charge status
Fault status
Interlock status
HV-On status

Interfaces

Complementary interfaces

RS232 Optical Fiber

Products

Complementary products

SR up to 16kV Power up to 2kW SR up to 150kV Power up to 2kW SR up to 150kV Power up to 40kW SR up to 70kV Power up to 40kW CCR up to 60kV Power up to 40kJ/s CCR up to 150kV Power to 20kJ/s CCR up to 16kV Power up to 1kJ/s CCR up to 150kV Power up to 1kJ/s

You need
informations ?

Request a quote

6-8 rue Eugène Dupuis ZAC Europarc 94000 Créteil, FRANCE
+33(0) 1 56 71 28 60

Company

Solutions

GET IN TOUCH

CONTACT & QUOTE