Distributor area

HV capacitor charging power supply

CC1M up to 200kV Power up to 1kJ/s

Capacitor Charging power supply, voltage up to 200kV and up to 1kJ/s, for single phase mains.

Main specification

Charging Power:

150 J/s to 1kJ/s

Voltage:

up to 150kV

Polarity:

Positive, Negative, Reversible

Operating frequency:

10Hz, up to 3kHz on demand

Reproducibility:

0.1%

Voltage holding:

0.1% p-p of full voltage - better on demand

Remote interface:

0-10V analogue – see other interfaces

Based on the ZCS resonant topology, the CCR range is designed specifically for charging HV capacitors.
Dry isolated, it offers high reliability and high operational availability. No special maintenance is required.

Detailed specification

Format:
3U 19” Rack
Efficiency:
> 90% at full load
Mains input:
170 to 255 VAC, 47-63 Hz
Single Phases + Earth
Input Power Factor:
≥ 0.98
Inrush current:
Limited to operating current at full power
Local controls:
Mains power switch, safety lock, HV on, HV off, Over current mode, Preset, Voltage an current setting, Limitation of voltage setting.
Status Indicators:
HV on, HV off, Line, Fault, Interlock, Remote, Over current limitation/protection, Regulation mode
Voltage and current display:
4.5 Digit
Output voltage and current setting:
Continuously adjustable from 0 to 100%
Local control mode:
10 turn potentiometer (0.05% resolution)
Remote control mode:
External 0 to 10V signal
Voltage and current regulation*:
Static Load regulation:
±0.05% of full voltage or current for no load to full load variation – better on demand
Static Line regulation:
±0.05% of full voltage or current for ±10% mains voltage variation (better on demand)
Stability (after 1-hour warm-up):
100 ppm /hour, operating at constant load and temperature
Regulation modes:
Constant Voltage (CV) and Constant Current (CC) regulations, with automatic crossover.
Protections:
Short circuit, Arc quench, External interlock, Over temperature, Overload, Over voltage, Over current,
Cooling:
Air forced
Air inlet on the front panel, with dust filters
Air outlet on the rear panel
Ambient temperature:
From 0 to 50 °C
Ambient Humidity:
0 to 80% at 25°C, 50% at 40°C (non-condensing)
Temperature coefficient:
100 ppm/°C
Stored Energy:
0.2 J/kJ
Documentation:
User manual, Test report, EU declaration of conformity (CE), RoHS2 declaration of conformity
Accessories:
Removable 3 m coaxial HV cable with one plug mounted on one end.
Interlock connector.
2 keys for safety lock.
CE22 power cord for mains connection (for 150J/s, 300J/s and 600J/s models).
CE19 power cord for mains connection (for 1kJ/s models).
Standards and regulations:
Low voltage directive: 2014/35/EU
EMC directive: 2014/30/EU
RoHS directive: 2011/65/EU
EN 61000-6-2:2005 + AC (2005)
EN 61000-6-4:2007 + A1 (2011)
EN 61326-1:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61010-1:2010
EUROLAB EMC decision n°11: issue 1 of 18 of December 2007
Standard conditions of operation
Complete discharge
Max. frequency : 10 Hz
Capacitor Load
Reversal Voltage ≤10% of Vmax for a charging time between 0.1s and 5s
(*) for fixed polarity

Applications

Range

OUTPUT
VOLTAGE
(kV)
20 kV
30 kV
150 W
Max current (mA)
Model
15
CCR20KV-150J
10
Contact us
300 W
Max current (mA)
Model
30
CCR20KV-300J
Contact us
Contact us
600 W
Max current (mA)
Model
60
CCR20KV-600J
Contact us
Contact us
1000 W
Max current (mA)
Model
Contact us
Contact us
Contact us
Contact us
You need
informations ?