RS232 Optical Fiber

With this Option, Technix Power Supplies can be remotely controlled with a computer terminal through an RS-232 interface. This interface is available on the rear panel of the power supply. Connection to the power supply is managed through two optical fiber links.

Request a quote

Main specification Detailed specification Interfaces Products

MAIN SPECIFICATION

A power supply with optical fiber option is supplied with the following equipment:

Includes an external optical fiber / RS-232 converter
2 optical fibers cables (25m each)
USB cable (powering the external converter)
DE-09 cable (for communication with PC terminal)

RS232 Board features:

Specially designed for High Voltage environment
Labview runtime available (option)
Optical fiber (option)
Full duplex mode
Bauds rate: 9600
ASCII protocol
12 Bits resolution
Communication frequency: 10Hz

Detailed specification

Instructions available on the RS232 interface:

Output Voltage setting
Output current setting
Output voltage measurement
Output current measurement
HV-On control
HV-Off control
Remote control
Inhibit control
Mains Monitor
Regulation mode status
End of Charge status
Fault status
Interlock status
HV-On status

Interfaces

Discover all complementary interfaces

RS232 Digital interface

Products

Discover all products associated to this interface

S1H up to 16kV Power up to 2kW S1M up to 150kV Power up to 2kW S3H up to 70kV Power up to 40kW S3M up to 150kV Power up to 40kW CC1H up to 16kV Power up to 1kJ/s CC1M up to 200kV Power up to 1kJ/s CC3H up to 60kV Power up to 40kJ/s CC3M up to 150kV Power to 20kJ/s

You need
informations ?

Request a quote

Company

Solutions

GET IN TOUCH

Contact & quote