HV capacitor charging power supply

CCR up to 16kV Power up to 1kJ/s

Single phase mains Capacitor Charging Power Supplu with voltage up to 16kV and power up to 1kJ/s.

Main specification

Charging Power:

150J/s to 1kJ/s

Output Voltage:

Up to 16kV

Polarity:

Positive, Negative, Reversible, Floating output

Operating frequency:

10Hz, up to 3kHz on demand

Reproducibility:

0.1%

Voltage maintenance:

0.1% p-p of full voltage - better on request

Remote interface:

0-10V analogue – Additional interface available

Based on the ZCS resonant topology, the CCR range is designed for charging HV capacitors.

Air isolated, it offers high reliability, high operational availability requiring no special maintenance.

 

 

Detailed specification

Format:
3U 19” Rack
Efficiency:
> 90% at full load
Main Power Input:
170 to 255 VAC, 47-63 Hz
Single Phases + Earth
Input Power Factor:
≥ 0.98
Inrush Current:
Limited to operating current at full power
Local controls:
Mains power switch, safety lock, HV ON, HV OFF, Over current mode, Preset, Voltage an current setting, Limitation of voltage setting.
Status Indicators:
HV ON, HV OFF, Line, Fault, Interlock, Remote, Over current limitation/protection, Regulation mode
Voltage and current display:
4.5 Digit
Output voltage and current setting:
Continuously adjustable from 0 to 100%
Local control mode:
10 turn potentiometer (0.05% resolution)
Remote control mode:
External 0 to 10V signal
Voltage and current regulation*:
Static Load regulation:
±0.05% of full voltage or current for no load to full load variation - better on request
Static Line regulation:
±0.05% of full voltage or current for ±10% mains voltage variation - better on request
Stability (after 1-hour warm-up):
100ppm/hour, operating at constant load and temperature
Regulation modes:
Constant Voltage (CV) and Constant Current (CC) regulations, with automatic crossover.
Protections:
Short circuit, Arc quench, External interlock, Over temperature, Overload, Over voltage, Over current,
Cooling:
Air forced
Inlet through front panel (dust filters)
Outlet at rear panel
Ambient temperature:
0 to 50 °C
Ambient Humidity:
0 to 80% at 25°C, 50% at 40°C (non-condensing)
Temperature coefficient:
100ppm/°C
Stored Energy:
0.2J/kJ
Documentation:
User manual, Test report, EU declaration of conformity (CE), RoHS2 declaration of conformity
Accessories:
Removable 3m coaxial HV cable with one plug mounted on one end.
Interlock connector.
2 keys for safety lock.
CE22 power cord for mains connection (for 150J/s, 300J/s and 600J/s models).
CE19 power cord for mains connection (for 1kJ/s models).
Standards and regulations:
Low voltage directive: 2014/35/EU
EMC directive: 2014/30/EU
RoHS directive: 2011/65/EU
EN 61000-6-2:2005 + AC (2005)
EN 61000-6-4:2007 + A1 (2011)
EN 61326-1:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61010-1:2010
EUROLAB EMC decision n°11: issue 1 of 18 of December 2007
Standard conditions of operation
Complete discharge
Max. frequency : 10 Hz
Capacitor Load
Reversal Voltage ≤10% of Vmax for a charging time between 0.1s and 5s
(*) for fixed polarity

Applications

Range

OUTPUT
VOLTAGE
(kV)
1 kV
2.5 kV
5 kV
10 kV
15 kV
0.7 kV
150 W
Max current (mA)
Model
300
CCR1KV-150J
120
CCR2.5KV-150J
60
CCR5KV-150J
30
CCR10KV-150J
20
CCR15KV-150J
427.9
CCR0.7KV-150J
300 W
Max current (mA)
Model
600
CCR1KV-300J
240
CCR2.5KV-300J
120
CCR5KV-300J
60
CCR10KV-300J
40
CCR15KV-300J
856.95
CCR0.7KV-300J
600 W
Max current (mA)
Model
1200
CCR1KV-600J
480
CCR2.5KV-600J
240
CCR5KV-600J
120
CCR10KV-600J
80
CCR15KV-600J
1.75
CCR0.7KV-600J
1000 W
Max current (mA)
Model
2000
CCR1KV-1000J
800
CCR2.5KV-1000J
400
CCR5KV-1000J
200
CCR10KV-1000J
Contact us
Contact us
2.85
CCR0.7KV-1000J
You need
informations ?