19” Rack or 19” cabinet
> 92% at full load
400 VAC ±10%, 47-63 Hz
3 Phases + Earth
Input Power Factor:
≥ 0.90 at full load
Limited to operating current at full power
Mains power switch, safety lock, HV on, HV off, Over current mode, Preset, Voltage an current setting, Limitation of voltage setting.
HV on, HV off, Line, Fault, Interlock, Remote, Over current limitation/protection, Regulation mode
Voltage and current display:
Output voltage and current setting:
Continuously adjustable from 0 to 100%
Local control mode:
10 turn potentiometer (0.05% resolution)
Remote control mode:
External 0 to 10V signal
Voltage and current regulation*:
Static Load regulation:
±0.05% of full voltage or current for no load to full load variation – better on demand
Static Line regulation:
±0.05% of full voltage or current for ±10% mains voltage variation (better on demand)
Stability (after 1-hour warm-up):
100 ppm /hour, operating at constant load and temperature
Constant Voltage (CV) and Constant Current (CC) regulations, with automatic crossover.
Power regulation on demand.
Short circuit, Arc quench, External interlock, Over temperature, Overload, Over voltage, Over current
Air inlet on the front panel, with dust filters
Air outlet on the rear panel
From 0 to 50 °C
0 to 80% at 25°C, 50% at 40°C (non-condensing)
User manual, Test report, EU declaration of conformity (CE), RoHS2 declaration of conformity
Removable 3 m coaxial HV cable with one plug mounted on one end.
2 keys for safety lock.
Standards and regulations:
Low voltage directive: 2014/35/EU
EMC directive: 2014/30/EU
RoHS directive: 2011/65/EU
EN 61000-6-2:2005 + AC (2005)
EN 61000-6-4:2007 + A1 (2011)
EUROLAB EMC decision n°11: issue 1 of 18 of December 2007