Efficiency:
> 90% at full load
Mains Input:
170 to 255 VAC, 47-63 Hz
Single Phases + Earth
Input Power Factor:
≥ 0.98
Inrush Current:
Limited to operating current at full power
Local Controls:
Mains power switch, safety lock, HV ON, HV OFF, Over current mode, Preset, Voltage an current setting, Limitation of voltage setting.
Status Indicators:
HV ON, HV OFF, Line, Fault, Interlock, Remote, Over current limitation/protection, Regulation mode
Voltage and current display:
4.5 Digit
Output voltage and current setting:
Continuously adjustable from 0 to 100%
Local control mode:
10 turn potentiometer (0.05% resolution)
Remote control mode:
External 0 to 10V signal
Voltage and current regulation*:
Static Load regulation:
±0.05% of full voltage or current for no load to full load variation - better on request
Static Line regulation:
±0.05% of full voltage or current for ±10% mains voltage variation - better on request
Stability (after 1-hour warm-up):
100 ppm /hour, operating at constant load and temperature
Regulation modes:
Constant Voltage (CV) and Constant Current (CC) regulations, with automatic crossover.
Protections :
Short circuit, Arc quench, External interlock, Over temperature, Overload, Over voltage, Over current,
Cooling:
Air forced
Inlet through front panel (dust filters)
Outlet at rear panel
Ambient temperature:
0 to 50 °C
Ambient Humidity:
0 to 80% at 25°C, 50% at 40°C (non-condensing)
Temperature coefficient:
100 ppm/°C
Documentation:
User manual, Test report, EU declaration of conformity (CE), RoHS2 declaration of conformity
Accessories:
Removable 3 m coaxial HV cable with one plug mounted on one end.
Interlock connector.
2 keys for safety lock.
CE22 power cord for mains connection (for 150J/s, 300J/s and 600J/s models).
CE19 power cord for mains connection (for 1kJ/s models).
Standards and regulations:
Low voltage directive: 2014/35/EU
EMC directive: 2014/30/EU
RoHS directive: 2011/65/EU
EN 61000-6-2:2005 + AC (2005)
EN 61000-6-4:2007 + A1 (2011)
EN 61326-1:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61010-1:2010
EUROLAB EMC decision n°11: issue 1 of 18 of December 2007
Standard conditions of operation
Complete discharge
Max. frequency : 10 Hz
Capacitor Load
Reversal Voltage ≤10% of Vmax for a charging time between 0.1s and 5s
