Format:
19” Rack or 19” cabinet
Efficiency:
> 92% at full load
Mains Power Input:
400 VAC ±10%, 47-63 Hz
3 Phases + Earth
Input Power Factor:
≥ 0.90 at full load
Inrush current:
Limited to operating current at full power
Local controls:
Mains power switch, safety lock, HV ON, HV OFF, Over current mode, Preset, Voltage an current setting, Limitation of voltage setting.
Status Indicators:
HV on, HV off, Line, Fault, Interlock, Remote, Over current limitation/protection, Regulation mode
Voltage and Current display:
4.5 Digit
Output Voltage and Current setting:
Continuously adjustable from 0 to 100%
Local Control mode:
10 turn potentiometer (0.05% resolution)
Remote Control mode:
External 0 to 10V signal
Regulation modes:
Constant Voltage (CV) and Constant Current (CC) regulations, with automatic crossover.
Power regulation on request.
Static Load regulation:
±0.05% of full voltage or current for no load to full load variation - better on request
Static Line regulation:
±0.05% of full voltage or current for ±10% mains voltage variation - better on request
Stability (after 1-hour warm-up):
100 ppm/hour, operating at constant load and temperature
Protections:
Short circuit, Arc quench, External interlock, Over temperature, Overload, Over voltage, Over current,
Cooling system:
Air forced
Inlet through front panel (dust filters)
Outlet at rear panel
Ambient temperature:
0 to 50 °C
Ambient Humidity:
0 to 80% at 25°C, 50% at 40°C (non-condensing)
Temperature Coefficient:
100 ppm/°C
Documentation:
User manual, Test report, EU declaration of conformity (CE), RoHS2 declaration of conformity
Accessories:
Removable 3m coaxial HV cable with one plug mounted on one end.
Interlock connector.
2 keys for safety lock.
Standards and regulations:
Low voltage directive: 2014/35/EU
EMC directive: 2014/30/EU
RoHS directive: 2011/65/EU
EN 61000-6-2:2005 + AC (2005)
EN 61000-6-4:2007 + A1 (2011)
EN 61326-1:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61010-1:2010
EUROLAB EMC decision n°11: issue 1 of 18 of December 2007
